What is Cross Plate Anchors for?

Cross Plate Anchors are made for installation in augured holes. The cross plate anchor is formed by two structural plates shaped for reinforcement. A retainer on the bottom of the anchor holds the nut from the Forged eye rod (sold separately).

During installation, a hole to the size listed on the table for cross plate anchors is augured to a depth based on the rod length. The hole is then undercut so that the anchor can be positioned at a 90 degree angle to the guy wire. A rod trench is cut to the guy angle. The width of the trench should be just sufficient to accommodate the rod. The rod is secured to the plate anchor and placed in the excavated hole and trench. The hole is then refilled and tamped.

Cross plate anchors are coated with a rust inhibitor.

Cross Plate Anchors Specification

Part No.	Anchor Hole	Rod Size	Area	Weight
	Inch	Inch	Sq. In.	Kg / Pcs
E0416	16	5/8 or 3/4	150	3.5
E0420	20	5/8 or 3/4 or 1	250	7.3
E0424	24	3/4 or 1 or 1-1/4	400	15

Cross Plate Anchors Features

The cross plate anchor is constructed from solid, hot-dipped galvanized steel, with ridged cross plate rims for added resilience. The anchor is also coated in a rust inhibitor for extra durability. To pass quality control all cross plate anchors must meet ASTM specifications.

The anchor can be manually operated by an ‘eye’ at the upper end. A nut retainer is placed on the flattened bottom of the cross plate to enable the anchor to be fixed securely into place once installed.

Because the width of the hole does not negatively affect the installed anchor’s holding capacity, their installation does not require specialist anchoring machinery - the hole can be prepared by the same augers used to install utility poles.

How does Cross Plate Anchors works?

Cross Plate anchors are designed to be inserted diagonally against the side of a bored or drilled hole, one which has already been undercut to allow the anchor to sit at a 90-degree angle to the guy wire.

Once an additional, suitably sized trench is added to allow for the placement of the Anchor rod, the cross plate anchor can be installed. The cross plate at the lower end of the anchor digs into the internal soil mass, with a nut retainer securing the anchor firmly in place. The anchor can then be operated via the upper end as required.

Yokelink supply a vast range of Fasteners for various industries, including construction, automotive, machinery, energy, electronics, and more. To ISO, DIN, ANSI/ASME, BS, and JIS standards, including: Nuts, Bolts, Screws, Washers .

There are hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. The materials and finishes including Steel, Brass, Stainless Steel, Aluminum, Zinc plating, Galvanized and Black.

We provide standard and specialised Fastener solutions, coupled with industry customers. We can also have the flexibility, capacity and expertise to manufacture fully customised Fasteners specific to your application.

YOKELINK FASTENERS INCLUDING:

• Heavy Hex Bolt (ASTM A325/A325M, ASTM A490/A490M, EN14399-3, EN14399-4, JIS B1186(F10T), GB1228, AS1252, IS3757)
• Tension Control Bolt(ASTM F1852, F2280, EN14399-10, S10T, GB3632)
• Shear Connector (ISO13918, AWSD1.1 / 1.5, GB/T 10433, JIS B1198)
• Hex Bolt (DIN933 / DIN931, ISO4014 / 4017, EN15048, SAE A307, AS1110, JIS B1180 grade 4.8,8.8,10.9)
• Foundation Anchor Bolt ("L","J","U","I" type with 4.8, 8.8 and 10.9 grade. ASTM F1554 GR 36, 55, 105 )
• Thread Rod including Stud Bolt (DIN975 / 976, A193 B7)

Main Applications We Serve:

Keywords: Chinese fastener manufacturers, Fasteners manufacturer in china, Hex bolts manufacturer, screws factories in China, threaded rods suppliers, bolts and nuts suppliers, fasteners manufacturer in China, self tapping screws manufacturers, self drilling screws manufacturers